 |
Using a unique variable joining hinge and strong
brackets, these brass plated fittings allow a 35mm wood pole to be
fitted into most bay applications.
Brackets may be fitted to the wall above the frame, the frame itself
or the ceiling, depending on the bay structure.
Suitable for most weights of curtains, correct fitting allows bays
up to 360cm to be completed with confidence. Fittings
now also available in pewter.
Just select the components you need to make up your kit. |
|
Hinged elbow

Brass/pewter plated hinged elbow.
Although not shown there is a nylon strip that fits on top of the
pole to bridge the bracketallowing snag-free gliding of the rings.
Select the quantity of elbows you need by how many bends you have
in your bay. |
Hover over icons for more info
Unfortunately the pewter finish is temporarily unavailable. Please check this page for updates. |
|
|
Bracket

Brass/pewter plated bracket. Most bay windows will require three brackets,
one for each end and one in the centre. |
Hover over icons for more info
Unfortunately the pewter finish is temporarily unavailable. Please check this page for updates. |
|
|
35mm wood pole

35mm wood pole available in all four of the wood finishes you see
in the bar on the left to fit the bay pole brackets and elbows.
Maximum pole length in one piece is 210cm. If required, order seperate
lengths to make up the sides of your bay. |
Hover over icons for more info |
|
|
Rockingham finial

This finial is available in four of the wood finishes. |
Hover over icons for more info |
|
|
Ring

The bay pole ring is available in packs of four. Pencil pleat tape
headed curtains will usually require four rings per 30cm of pole.
Other headings may require fewer. |
Hover over icons for more info |
|
|
Hollow Brass Ring

Hollow brass rings are 10mm thick and are in packs of four. |
Hover over icons for more info |
|
|
All prices include VAT
 |