Ordering a small item?
Hover over the parcel for more info.
Ordering from Abroad?
Hover over the globe for more info.
= Co-ordinating holdbacks available
= Co-ordinating pole available
= Spare parts available
= Size information
= Component quantities
= Can be bent for bay windows
= Ordering help
= Important product information
= Estimated delivery
time, in working days.
= Maximum weight.
= Can be cut by hand using a hand saw.
= This is a made to measure item and cannot be returned.
Integra 28mm
Options
Pole
Ring
Finial
Bracket
Straight pole set
Passing ring
Corner bend
Passing bracket
Bay end bracket
Bay pole set
Price example: A 240cm
straight pole would comprise:
2 x 120cm poles, 24 x standard rings, 3 x standard brackets
and 1 x pair finials = £66.95
Price example: A 3 x sided bay with centre section
measuring up to 240cm and sides up to 120cm would comprise:
4 x 120cm poles, 24 x stnd rings, 24 x passing rings, 2 x
bay end brackets, 1 x bay centre bracket, 4 x passing brackets,
1 x pr finials & 2 x corner hinges = £188.90
Integra 28mm Options Pole
Hover over icons for more info
Click images to enlarge.
Plain 28mm diameter pole in a choice of four finishes and two lengths
which can easily be cut down to size with a hacksaw. Each pole length
is supplied with a finial adapter at each end to enable the compatible
finials, below, to be attached. For very long straight poles, join
lengths of pole together using the pole joiner, below and support
the join with a bracket. Passing rings allow the curtains to be drawn
past the passing brackets. For bay poles, select lengths to make up
the sides of your bay. It is recommended that a passing bracket is
used each side of each corner bend for support.
Integra 28mm Options Double Pole
Hover over icons for more info
Click images to enlarge.
28mm & 19mm diameter double pole in a choice of four finishes
and two lengths which can easily be cut down to size with a hand
saw or joined together to make longer lengths (Please remember to order pole joiners). Each double pole is supplied with double brackets and a finial
adapter at each end to enable the compatible finials, below, to be
attached.
NB: Not suitable for bay windows.
Integra Options 28mm Standard
Rings
Hover over icons for more info
Click images to enlarge.
Standard rings for straight poles and passing rings for very long
and bay window poles are available in four finishes in packs of six.
Integra Options 28mm Passing Rings
Hover over icons for more info
Click images to enlarge.
Standard rings for straight poles and passing rings for very long
and bay window poles are available in four finishes in packs of six.
Integra Options 28mm Mix & Match Finials
Hover over icons for more info
Click images to enlarge.
Integra Options 28mm Standard
Brackets
Hover over icons for more info
Standard brackets are used at the ends and centre of straight pole
arrangements. Brackets have a brace for extra support to stop any sagging under the weight of heavy cutains. For poles up to 180cm long 2 brackets are required Fpor poles over 180cm long 3 brackets are required.
Integra Options 28mm Passing Brackets
Hover over icons for more info
These clever passing brackets can be fitted to the wall or, by sliding the fixing plate up to the top of the curve, to the ceiling. We recommend fitting
a passing bracket each side of each corner bend. Passing brackets can also be used as intermediate brackets on very long poles. Used in conjunction with passing rings to allow
curtains to pass by unhindered so they can draw fully.
Integra Options 28mm Bay End Brackets
Hover over icons for more info
Bay end brackets are used at the end of bay window poles. The ring design grips the pole firmly to stop any movement.
Integra Options 28mm Bay Centre
Brackets
Hover over icons for more info
Bay centre brackets are used at the middle of a bay pole arrangement.
The ring design grips the pole firmly and also covers the join if
two pieces are used for the centre section.
Integra Options 28mm Corner Bend
Hover over icons for more info
Integra's clever corner bends are supplied straight and pre-notched
so that they can be bent by hand to any angle up to 90°. 2 joiners
are supplied to fit the joiner to the pole. Corner bends can be used
for internal and external bends so that reverse bends can be achieved.
Integra Options 28mm Pole Joiner
Hover over icons for more info
Metal pole joiner for connecting lengths of straight pole together.
Integra Options 28mm Hold Backs
Hover over icons for more info
Integra Options Hold Backs are a simple disk fronted stem holdback
designed to co-ordinate with the Options finishes and with any design
finial.
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
){kind=link}