 |
|
Search
| Home | Contact Us | About Us | Terms & Conditions | Currency Converter | Metric Converter |
|
| Products |
| Key | ||||||||||||||||||||||||||||
|
Xela Collection 16mm, 25mm & 31mm pole components |
|||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
16mm, 25mm & 31mm Pole |
 Hover over icons for more info Click on any image to see an enlarged example of a complete pole set in that finish. |
||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
Finial Adapter)
|
Hover over icons for more info Finial adapters are used to fit some of the finials that are only available in one size (16mm) to 25mm and 31mm poles. Finial adpters are not needed for the 16mm poles and are supplied as standard with 25mm and 31mm wood effect poles but not with the 4 metal finishes. |
||||||||||||||||||||||||||||
Finials |
Xela finials in a selection of materials. Hover over each finial for a description and over the blue icons for more information. Click on the image for an enlarged example of each finial on a pole.. |
||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
Pole joiner)
|
Hover over icons for more info This pole joiner once inserted can be expanded to ensure a good tight fit. |
||||||||||||||||||||||||||||
16mm, 25mm & 31mm Rings)
|
Hover over icons for more info Metal rings with nylon lining for a smooth quite run are available in polished nickel or polished brass for 16mm, 25mm and 31mm poles. Rings are supplied with removable eyes (shown in centre of ring) and are available in packs of 6. |
||||||||||||||||||||||||||||
Wall Bracket)
|
 Hover over icons for more info Standard wall fix brackets available in polished brass and polished nickel with adjusting screw, extendable by 20mm |
||||||||||||||||||||||||||||
100m Extension Wall Bracket)
|
Hover over icons for more info Extension wall brackets available in 4 finishes with adjusting grub screws, extendable from 100mm - 150mm. |
||||||||||||||||||||||||||||
240cm Extension Wall Bracket)
|
Hover over icons for more info Extension wall brackets available in 4 finishes with adjusting grub screws, extendable from 240mm - 290mm. |
||||||||||||||||||||||||||||
Double Extension Wall Bracket)
|
Hover over icons for more info Double extension wall brackets available in 4 finishes with adjusting grub screws, extendable from 180mm - 230mm. Available in 3 x size combinations; 25mm pole at the front with 16mm pole at the back, 25mm pole at the front and 25mm pole at the back, 31mm pole at the front and 25mm pole at the back. |
||||||||||||||||||||||||||||
Adjustable Wall Bracket Support)
|
Hover over icons for more info Adjustable wall bracket support to fit all extension brackets to give extra support to heavy curtains. Available in 4 finishes with adjusting screws. |
||||||||||||||||||||||||||||
Recess Bracket)
|
Hover over icons for more info Recess brackets available in 4 finishes. 2 part to allow fixing a pole in a tight recess. |
||||||||||||||||||||||||||||
Ceiling Bracket)
|
Hover over icons for more info Ring bracket designed for ceiling fix available in a selection of lengths and in 4 finishes. |
||||||||||||||||||||||||||||
Swan Neck Holdback)
|
Hover over icons for more info The Swan Neck holdback arm is hinged so it hangs freely against the curtain edge. Designed to be teamed up with any finial above. |
||||||||||||||||||||||||||||
Holdback Stem)
|
Hover over icons for more info The holdback stem can be teamed up with any finial above and used with the finial pointing upwards or to the side. |
||||||||||||||||||||||||||||
Ball End Holdback Arm)
|
Hover over icons for more info The Ball End holdback arm is hinged so it hangs freely against the curtain edge. |
||||||||||||||||||||||||||||
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
){kind=small}
){kind=small}
){kind=small}
)
)
)
