 |
|
Search
| Home | Site Map | Contact Us | About Us | Terms & Cond | Currency Conv | Metric Conv | Catalogue |
|
| Products |
|
|
| Key | ||||||||||||||||||||||||
|
)
|
Sunflex 16mm Ø Bay Pole KitThe Sunflex 16mm bay pole kit is available in real stainless steel, antique brass effect, copper effect and black. The standard kit will fit any two bend bay up to 180cm across the main part of the window and 90cm at each side. The hinged joints can be bent to any angle up to 90°. Reverse bends can be achieved with the addition of the reverse bend kit which allows the pole to extend out of the bay and back against the room walls. The use of twoprecision engineered brackets at each end of the pole ensures a stable installation for curtains up to medium weight.This pole can be both wall and ceiling fixed, although, as the brackets are a fixed length, if fitted to the ceiling, there will be a gap of approximately 45mm between the ceiling and the top of the pole. |
||||||||
| Standard Sunflex Bay Pole kit in real stainless steel at the top and with the addition of the reverse bend in the copper finish below. | |||||||||
|
|||||||||
Standard Bay Pole Set) ) |
Hover over icons for more info Each length of pole can easily be cut down to length with a hacksaw to suit your window. The contemporary ball finials and hinged joints push-fit into place for easy fitting and the brackets have descreet fixings to hide the screws. |
||||||||
Reverse Bend Kit) ) |
Hover over icons for more info |
||||||||
Additional Rings 4 Pack |
Hover over icons for more info |
||||||||
All prices include VAT
 |
|||||||||
)
)
